In this installment, Adam prepares the bed of the C-10 for bed liner application. After he’s scuffed and cleaned the bed, he rolls on rust encapsulator to trap any minor rust that may still be lurking. A coat of primer ensures there’s no issues with the bed liner materials, which he sprays on using a […]
A Rescued Buick Grand National Revealed After 19 Years
It’s not everyday you get to rescue a legend, but one of our local shops did just that. After nineteen years sitting on a private property, Pottstown’s Hollywood Garage brought home a Buick Grand National they’d had their eyes on for years. The original paint was still there, but was buried under years of dust […]
Projects – The Cushman Scooter Restomod
A few years back, our guy Matt got hold of an old Cushman motor scooter. True to Eastwood tradition, it was a rusty pile – not much more than a starting point. Matt had plans to not only bring back the looks of the old icon, but also give it new life as a hot […]
Projects – That Time We Built a Go Kart
We spend a lot of time talking about restoration and repair on older vehicles. But once an upon a time, we decided to try something a little different. We built a go kart. From scratch. Over the course of a ten-part series, the Eastwood video team built a traditional single-seat, gas-powered go kart using the […]
Making Your First CNC Plasma Project
For a lot people who make the jump to a CNC plasma cutter, one of their first projects is often a piece of decorative artwork like a sign. The risk is low, the reward is often high, and the learning curve is just steep enough to be a real lesson. That was the case with […]
We Answer Your Questions About Rust Encapsulator Plus
If there’s one Eastwood product that gets everyone asking questions, it’s our Rust Encapsulator Plus. To answer all the questions we usually hear, our video team put together a short Q&A vid that demonstrates how, when, and why of this signature product. Check out the video below and add to the conversation in the comments […]
Build a Custom Exhaust Using a Tubing Kit
You don’t have to have a shop full of tools to build a custom exhaust for your project. In this video, our product manager Cody walks you through the process of creating a system from scratch using a builder kit consisting of pre-bent, pre-flared tubing and aftermarket mufflers. Cody gets into measuring, cutting, and MIG […]
Bagged C-10 – Episode 5: Rusty Frame Repair and Repaint
In this episode, Adam covers all the steps required to repair the cracks in 10-year-old frame notch kit as well as years of general rust damage. In the process, he repaints the entire frame behind the cab while the bed is still off. Watch the video to see how nice it turned out. Like this: […]
Bagged C-10 – Episode 4: Making New Brake Lines From Scratch
While Adam had the bed off his C-10 for chassis refinishing, he decided to overhaul his old brake lines. The original equipment brake lines were rusting from the inside and showing signs of fatigue from past work. The original flares were leaking as well, and the heads of the fittings were getting rounded. They definitely […]
Beginner’s Guide to TIG Welding Basics (Video)
Tungsten Inert Gas welding – aka, TIG welding – is at once an exceptionally useful skill to learn and a bit perplexing. The challenge of learning to TIG comes down to patience, a steady hard, and extraordinary eye-hand coordination. Many an experienced welder has fallen short when it comes to learning this method. For this […]